FLOW ACTIVA_HF (horizontal laminar flow)
|
|
The cabinet Flow Activa_HF is an horizontal laminar flow cabinet, designed to protect the ONLY product (and not the operator and/or the environment).
Cabinet with work area protected by horizontal laminar flow, class 100 (ISO 5), bench model, is appropriate for handling of goods or non-pathogenic culture media in a sterile environment. In fact these cabinets are mainly used for applications such as manipulation of sensitive products to the ambient air contamination, preparation of culture media, control of infertility, assembly of electronic or optical equipments, in the food industry for quality checks, etc. |
|
|
- External chassie in steel sheet (thickness 12/10), epoxy paint
- Removable unbreakable tempered side glasses (thickness 5 mm)
- Worktop in stainless steel AISI 304 scotch-brite
- n� 1 fan motor (n�2 fan motors in the cabinet Flow Activa HF 180) with electronic control able to compensate for losses due to the gradual clogging of the HEPA filter and prefilters
- n� 1 HEPA filter in class H14, removable from the rear of the machine, with efficiency greater than 99,995 MPPS (ex 99,999% of particles with diameter equal or greater than 0.3 microns) which complies with all regulations.
- Synthetic prefilters of intake, washable in water or with compressed air, minimum efficiency 75%ASRHAE
- Automatic regulation of the speed of sterile air in horizontal laminar flow for the automatic compensation of the clogging of the filter
- Audio and visual alarms for:
* clogging of the filter
* malfunction of the fan
* faults in horizontal laminar flow
* reached limit of use of filter installed
* end of UV lamp life
- Soft touch membrane keyboard in static protection
- Vibration on the inox plan: < 0,006 mm rms
- Noise level: < 60 dBA
- Average speed LAF: > 0,50 m/sec
- Light: white fluorescent lamps
- Light on working top: > 800 lux
- Power supply: 230 V / 50 H
- External dimensions:
� Flow Activa HF 90: 970 x 1050 x 1225 mm (L x W x H)
� Flow Activa HF 120: 1270 x 1050 x 1225 mm (L x W x H)
� Flow Activa HF 180: 1880 x 1050 x 1225 mm (L x W x H)
- Internal dimensions:
� Flow Activa HF 90: 810 x 610 x 735 mm (L x W x H)
� Flow Activa HF 120: 1110 x 610 x 735 mm (L x W x H)
� Flow Activa HF 180: 1720 x 610 x 735 mm (L x W x H)
- Work top height from floor: 900 mm
- Weight:
� Flow Activa HF 90: 103 kg
� Flow Activa HF 120: 143 kg
� Flow Activa HF 180: 180 kg
CONTROL BOARD
On the control panel, which contains the electronic board controlled by a new generation microprocessor, are present:
- general switch with button O/I light green
- digital display of the speed of horizontal laminar flow in meters/second
- drive emergency solenoid valve (if installed) on gas tap
- electronic digital hour meter of the operating of the machine
- electronic digital hour meter of the operating of the lamp U.V. (if installed)
- operation timer U.V. lamp (if installed) countdown that can be set by the client with auto power off at the end of cycle
- electronic alarm insufficient air speed of LAF
- alarm for high pressure inside (HEPA filter clogging)
- Early warning reached maximum time limit of use HEPA filter installed, with indication of the need to replace next
- Early warning of exhaustion of germicidal capacity of UV lamp, with indication of the need to replace next
COMPLIANCE
Class I equipment according to CEI EN 61010-1
Italian Electrotechnical Committee (CEI 66.5 and 62.25)
UNI-CIG |
|
